Slide Gate Operator

Slide gate operator is made of heavy-duty, galvaneeled weather-resistant enclosure with black powder coat finish. It is key lockable and the housing is large enough to contain a control panel and any additional accessories, such as loop detectors or timers.

This unit utilizes a double v-belt drive and roller-chain reduction. The operator also has a lever-type disconnect which when released will allow the gate to be operated manually.

VS-GSLG - Variable Speed Gear Driven

Features:

CABINET

  • Weather-resistant galvaneeled steel cabinet with powder coat finish
  • Lockable, gasketed, hinged, and removable front cover for easy access

MECHANICAL

  • Heavy-duty 10:1right-angle C-face gear reducer
  • #50 roller chain and sprockets
  • Adjustable torque limiter
  • Heavy-duty pillow-block bearings

ELECTRICAL

  • Variable speed - soft start, soft stop
  • 1/2, 3/4 or 1hp, 115 or 230 VAC, single phase, thermally protected, heavy-duty
    C-face PSC motor; 1/2, 3/4 or 1 hp, 230 or 460 VAC, 3 phase heavy-duty motor
  • Double C-face brake
  • Power on/off switch
  • 24 V Control Circuit
  • Emergency stop/reset button on front cover
  • Duplex receptacle on 115 VAC units
  • Three-Button control station included
  • Accessory connections are 24-volt AC or DC
  • Easily adjustable rotary limit switches
  • Full systems capable for access controls and reversing devices
  • Continuous tone entrapment alarm
  • Warning beeper to sound when gate is moving
  • Pre-start audio/visual outputs included
  • Emergency disconnect for manual operation in case of power failure

HSLG - Belt Driven

Features:

CABINET

  • Weather-resistant galvaneeled steel cabinet with powder coat finish
  • Lockable, gasketed, hinged, and removable front cover for easy access

MECHANICAL

  • #40 roller chain and sprockets
  • Adjustable torque limiter
  • Heavy-duty pillow-block bearings
  • Efficient double V-belt drive

ELECTRICAL

  • 1/2, 3/4 or 1hp, 115 or 230 VAC, single phase, thermally protected, heavy-duty
    PSC motor; 1/2, 3/4 or 1 hp, 230 or 460 VAC, 3 phase heavy-duty motor
  • Double C-face brake
  • Power on/off switch
  • 24 V Control Circuit
  • Emergency stop/reset button on front cover
  • Duplex receptacle on 115 VAC units
  • Three-Button control station included
  • Accessory connections are 24-volt AC or DC
  • Easily adjustable rotary limit switches
  • Full systems capable for access controls and reversing devices
  • Continuous tone entrapment alarm
  • Warning beeper to sound when gate is moving
  • Pre-start audio/visual outputs included
  • Emergency disconnect for manual operation in case of power failure
UL325 requires the use of contact or non-contact anti-entrapment devices.