Slide gate operator is made of heavy-duty, galvaneeled weather-resistant enclosure with black powder coat finish. It is key lockable and the housing is large enough to contain a control panel and any additional accessories, such as loop detectors or timers.
This unit utilizes a double v-belt drive and roller-chain reduction. The operator also has a lever-type disconnect which when released will allow the gate to be operated manually.
VS-GSLG – Variable Speed Gear Driven
Features:
CABINET
- Weather-resistant galvaneeled steel cabinet with powder coat finish
- Lockable, gasketed, hinged, and removable front cover for easy access
MECHANICAL
- Heavy-duty 10:1right-angle C-face gear reducer
- #50 roller chain and sprockets
- Adjustable torque limiter
- Heavy-duty pillow-block bearings
ELECTRICAL
- Variable speed – soft start, soft stop
- 1/2, 3/4 or 1hp, 115 or 230 VAC, single phase, thermally protected, heavy-duty
C-face PSC motor; 1/2, 3/4 or 1 hp, 230 or 460 VAC, 3 phase heavy-duty motor - Double C-face brake
- Power on/off switch
- 24 V Control Circuit
- Emergency stop/reset button on front cover
- Duplex receptacle on 115 VAC units
- Three-Button control station included
- Accessory connections are 24-volt AC or DC
- Easily adjustable rotary limit switches
- Full systems capable for access controls and reversing devices
- Continuous tone entrapment alarm
- Warning beeper to sound when gate is moving
- Pre-start audio/visual outputs included
- Emergency disconnect for manual operation in case of power failure
HSLG – Belt Driven
Features:
CABINET
- Weather-resistant galvaneeled steel cabinet with powder coat finish
- Lockable, gasketed, hinged, and removable front cover for easy access
MECHANICAL
- #40 roller chain and sprockets
- Adjustable torque limiter
- Heavy-duty pillow-block bearings
- Efficient double V-belt drive
ELECTRICAL
- 1/2, 3/4 or 1hp, 115 or 230 VAC, single phase, thermally protected, heavy-duty
PSC motor; 1/2, 3/4 or 1 hp, 230 or 460 VAC, 3 phase heavy-duty motor - Double C-face brake
- Power on/off switch
- 24 V Control Circuit
- Emergency stop/reset button on front cover
- Duplex receptacle on 115 VAC units
- Three-Button control station included
- Accessory connections are 24-volt AC or DC
- Easily adjustable rotary limit switches
- Full systems capable for access controls and reversing devices
- Continuous tone entrapment alarm
- Warning beeper to sound when gate is moving
- Pre-start audio/visual outputs included
- Emergency disconnect for manual operation in case of power failure
UL325 requires the use of contact or non-contact anti-entrapment devices.